EN 13036-4 Compliant Pendulum Slip Resistance Tester for Road and Airfield Surface Testing with Shore Hardness 55 ± 5

EN 13036-4 Pendulum Slip Resistance Tester

Product Introduce

This product is mainly used for the friction coefficient detection of high-grade highways and laboratories, as well as airport runways. It can also be used for the detection of the anti-slip performance of rubber runways, floor tiles and other substances that require anti-slip properties, in order to evaluate the anti-slip performance of the road surface (before evaluating the anti-slip value, it is possible to replace the hardness of the film to 96 or adjust the normal static pressure of the film on the ground from 22.2N to 24.5N). It is also used for the determination of the polishing value of test pieces after the stone material accelerated polishing machine test. The pendulum tester is the testing instrument equipped with the stone material accelerated polishing machine.

Standard:

EN 13036-4

Parameter

Weight of pendulum: 1500g ± 30g;

Distance from the center of gravity of pendulum to the end: 410mm ± 5mm

Normal static pressure of the rubber slider (rubber sheet) on the road surface: 22.2N ± 0.5N

Dimension of rubber sheet (road surface): 6.35mm x 25.4mm x 76.2mm

Dimension of rubber sheet (for coarse aggregate): 31.75mm x 25.4mm x 6.35mm

Sliding length of pendulum on the road surface: 126mm ± 1mm

Distance from the end of the rubber sheet to the center of swing of the pendulum: 510mm ± 2mm; Shore hardness of rubber sheet: 55 ± 5

Product Tags:

Shore Hardness 55 ± 5 Pendulum Slip Resistance Tester

      

Road and Airfield Surface Testing Pendulum Friction Tester

      

Slip Resistance Detection Surface Friction Tester

      

EN 13036-4 Compliant Pendulum Slip Resistance Tester for Road and Airfield Surface Testing with Shore Hardness 55 ± 5 Images